Panasonic KX-PRL262 MP3 Docking Station User Manual


 
Answering system settings
Call screening
Handset / Base unit
W
hile a caller is leaving a message, you can
listen to the call through the unit’s speaker.
To adjust the speaker volume, press MDN or
MCN on the handset, or press MjN or MkN on
the base unit repeatedly.
You can answer the call by pressing M
N
on
the handset or MZN on the base unit.
Call screening can be set for each unit. The
default setting is On.
1 For handset setting: MMENUN (right soft
key) #310
For base unit setting: MMENUN (right
soft key) #*310
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Number of rings before the unit
a
nswers a call
You can change the number of times the
phone rings Ring count before the unit
answers calls. You can select 2 to 7 rings, or
Toll saver.
The default setting is 4 rings.
Toll saver: The unit’s answering system
answers at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 55), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1 MMENUN (right soft key) #211
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
For voice mail service subscribers
I
f you subscribe to a flat-rate service package
that includes Caller ID, call waiting, voice mail,
and unlimited local/regional/long distance
c
alls, please note the following:
R To use the voice mail service provided by
your service provider/telephone company
rather than the unit’s answering system,
turn off the answering system (page 51).
R To use this unit’s answering system rather
than the voice mail service provided by
your service provider/telephone company,
please contact your service provider/
telephone company to deactivate your
voice mail service.
If your service provider/telephone company
cannot do this:
Set this unit’s Ring count setting so
that this unit’s answering system
answers calls before the voice mail
service of your service provider/
telephone company does. It is necessary
to check the number of rings required to
activate the voice mail service provided
by your service provider/telephone
company before changing this setting.
Change the number of rings of the voice
mail service so that the answering
system can answer the call first. To do
so, contact your service provider/
telephone company.
Caller’s recording time
Y
ou can change the maximum message
recording time allowed for each caller. The
default setting is 3 min.
1 MMENUN (right soft key) #305
2 MbN: Select the desired setting. a
MSAVEN a MOFFN
Selecting “G
reeting only
You can select Greeting only which sets
the unit to announce a greeting message to
callers but not record messages.
Select Greeting only in step 2 on
“Caller’s recording time”, page 56.
Note:
R When you select Greeting only:
If you do not record your own message,
the unit will play the pre-recorded
56
For assistance, please visit http://www.panasonic.com/help
Answering System for Landline
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 56 2014/01/09 11:59:44