Filter
Top Products
Pause (for PBX/long distance service
u
sers)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 30).
Example: If you need to dial the line access
number “9” when making outside calls with a
PBX:
1 9 a MDN (Pause)
2 Dial the phone number. a M
N
N
ote:
R A 3.5 second pause is inserted each time
MDN (Pause) is pressed.
Answering calls
Using the handset
1 L
ift the handset and press M
N
or MZN
when the unit rings.
R To answer a cellular call, you can also
press MCELLN.
2 When you finish talking, press MOFFN or
place the handset on the base unit or
charger.
Any key answer: You can answer the call by
pressing any dial key.
Auto talk: You can answer calls simply by
lifting the handset (page 37).
Temporary handset ringer off: You can turn
the ringer off temporarily by pressing M
N.
Using the Smart function key
When the indicator flashes rapidly, press
M
N.
R Y
ou can answer the call even if the handset
is placed on the base unit or charger
(page 16).
You can finish talking by pressing MOFFN
without lifting up the handset.
Adjusting the handset ringer volume
P
ress MDN or MCN repeatedly to select the
desired volume while ringing.
Using the base unit
W
hen a landline call is being received, the Z
indicator flashes rapidly. When a cellular call is
being received, the CELL 1 or CELL 2
indicator and Z indicator flash rapidly.
1 Press MZN when the unit rings.
2 Speak into the microphone.
3 When you finish talking, press MZN.
Adjusting the base unit ringer volume
P
ress MjN or MkN repeatedly to select the
desired volume while ringing.
R To turn the ringer off, press and hold MkN
until the unit beeps.
Adjusting the base unit speaker
v
olume
Press MjN or MkN repeatedly while talking.
Useful features during a
c
all
Hold
1 P
ress MMENUN during an outside call.
2 MbN: “Hold” a MSELECTN
3 To release hold on the cellular line:
Press MCELLN.
R Another handset user can take the call:
MCELLN
*1
a MSELECTN
*1 The call is taken when:
– only 1 cellular phone is paired.
– a specific line is set to make
cellular calls (page 20).
R The base unit user can take the call by
pressing MZN.
To release hold on the landline:
Press M
N.
22
For assistance, please visit http://www.panasonic.com/help
Making/Answering Calls
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 22 2014/01/09 11:59:39