Panasonic KX-PRL262 MP3 Docking Station User Manual


 
9 MbN:
Select the desired snooze setting.
a MSAVEN
10 MSELECTN a MOFFN
Note:
R Press MSTOPN to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key, M
N,
or MSNOOZEN to
stop the sound but keep the snooze
function activated.
R If you want to make an outside call when
the snooze function is activated, please
stop the snooze function before making the
call.
Silent mode
S
ilent mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Silent mode can
be set for each unit.
Using the phonebook’s group feature
(page 28), you can also select groups of
callers whose calls override silent mode and
ring the handset (Caller ID subscribers only).
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
R We recommend turning the base unit ringer
off (page 34, 35) in addition to turning the
silent mode on.
R If you have set the alarm, the alarm sounds
even if the silent mode is turned on.
Turning silent mode on/off
1 MM
ENUN (right soft key) #238
2 MbN: Select the desired setting. a
MSAVEN
R If you select Off, press MOFFN to
exit.
3 Enter the desired hour and minute you
wish to start this feature.
4 *: Select AM or PM. a MOKN
5 E
nter the desired hour and minute you
wish to end this feature.
6 *: Select AM or PM.
7 MSAVEN a MOFFN
Changing the start and end time
1 MM
ENUN (right soft key) #237
2 Continue from step 3, “Turning silent
mode on/off”, page 40.
Selecting groups to bypass silent
m
ode
1 MMENUN (right soft key) #241
2 Select your desired groups by pressing
1 to 9.
R
” is displayed next to the selected
group numbers.
R To cancel a selected group, press the
same dial key again. “
” disappears.
3 MS
AVEN a MOFFN
Call block
T
his feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (250 max.).
Block a single number: The unit
can reject calls from specific phone
numbers.
Block range of numbers: The unit
can reject calls that begin with a number
stored in the call block list, such as a
toll-free phone number prefix or certain
area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit rings briefly
*1
while caller information is being received. If
the caller’s phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call.
*1 This is called first ring. If you do not want
the first ring to sound, turn this setting to
Off (page 41).
40
For assistance, please visit http://www.panasonic.com/help
Programming
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 40 2014/01/09 11:59:42