Panasonic KX-PRL262 MP3 Docking Station User Manual


 
Answering system for
l
andline
The answering system can answer and record
calls for you when you are unavailable to
answer the phone.
You can also set the unit to play a greeting
message but not to record caller messages by
selecting Greeting only as the recording
time setting (page 56).
Important:
R Make sure the unit’s date and time setting
is correct (page 15).
Memory capacity (including your
g
reeting message)
The total recording capacity is about 18
minutes. A maximum of 64 messages can be
recorded.
Note:
R When message memory is full:
Messages full is shown briefly on
the handset display.
The
indicator on the base unit
flashes quickly. (If there are new
messages recorded, the indicator
flashes slowly until you have listened to
the new messages.)
If you use the pre-recorded greeting
message, the unit automatically switches
to another pre-recorded greeting
message asking callers to call again
later.
If you recorded your own greeting
message, the same message is still
announced to callers even though their
messages are not recorded.
Turning the answering
s
ystem on/off
1 To turn on:
MMENUN (right soft key) #327
To turn off:
MMENUN (right soft key) #328
2 MO
FFN
Note:
R When the answering system is turned on,
is displayed on the handset.
indicator on the base unit lights up.
Greeting message
W
hen the unit answers a call, a greeting
message is played to callers.
You can use either:
your own greeting message
a pre-recorded greeting message
Recording y
our greeting message
1 MMENUN (right soft key) #302
2 MbN: Yes a MSELECTN
3 After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4 Press MSTOPN to stop recording. a
MOFFN
Using a pre-recorded greeting
m
essage
The unit provides 2 pre-recorded greeting
messages:
If you erase or do not record your own
greeting message, the unit plays a
pre-recorded greeting asking callers to
leave a message.
If the message recording time (page 56)
is set to Greeting only, callers’
messages are not recorded and the unit
plays a different pre-recorded greeting
message asking callers to call again.
Resetting to a pre-recorded greeting
m
essage
If you want to use a pre-recorded greeting
message once you record your own greeting
message, you need to erase your own
greeting message.
For assistance, please visit http://www.panasonic.com/help
51
Answering System for Landline
PRL262_PRD262_OI_(en_en)_0109_YA_ver001.pdf 51 2014/01/09 11:59:43