Filter
Top Products
12
RQT8075
Useful functions for playing discs
Changing play speed
[RAM] [DVD-RW[‹VR›] [DVD-V]
Enjoying virtual surround (Advanced Surround)
[RAM] [DVD-RW[‹VR›] [DVD-V] [VCD] (2 or more channels)
A surround sound effect can be made using 2 speakers (on other equipment).
≥
When
using the headphones
, press
to select “HP 1 Natural” or “HP 2 Enhanced”.
≥
When using discs recorded with surround sound, sound seems to come from speakers on either side of you.
≥
Optimum seating position is 3 to 4 times the distance between the front left and right speakers or the
width of the television if using the television’s speakers.
≥
Do not use in combination with surround effects on this unit (➜ page 14, Sound quality) or on other
equipment.
≥
To exit the screen : Press [RETURN].
Repeating a specified section
(A-B Repeat)
Except [JPEG] [MPEG4] and [RAM] [DVD-RW[‹VR›]
(still picture part)
Repeat play
(Only when the elapsed play time can be
displayed. For JPEG, you can use even if
there is no elapsed time display.)
ENTER
ENTER
A-B Repeat
Menu
DISPLAY
DISPLAY
1
2
Press once
during play.
1 Press [34] to select Other
Settings.
2 Press [1] to go to the next
menu and [34] to select
“Play Menu”.
3
Press
[1]
to go to the next
menu and
[34]
to select “Repeat” or “A-B Repeat”.
4 Selecting “Repeat”: Press [1] and [34] to select
the content to repeat and press [ENTER].
Selecting “A-B Repeat”: Press [ENTER] at the
starting and ending points.
≥
To cancel “Repeat”: In step 4, press [
1
] and [
34
] to select “Off” and press [ENTER].
≥
To cancel “A-B Repeat”: After step 4, press [ENTER] again.
≥
To exit the screen : Press [RETURN].
e.g. A-B Repeat
ENTER
ENTER
DISPLAY
DISPLAY
1
2
1 Press [34] to select Other Settings.
2 Press [1] to go to the next menu and [34] to
select “Play Speed”.
3 Press [ENTER] and [34] to select
“Normal” or “k0.6” to “k1.4” (in 0.1 units).
4 Press [ENTER].
≥
Press [1] (PLAY) to return to normal play.
≥
After you change the speed
– Advanced Surround (➜ below) and Multi Re-master (➜ page 14) do not work.
– Audio output switches to 2 ch (Digital output switches to PCM).
– 96 kHz sampling frequency is converted to 48 kHz.
≥
This may not work depending on the disc’s recording.
≥
To exit the screen : Press [RETURN].
Press once
during play.
1 Press [34] to select Other Settings.
2 Press [1] to go to the next menu and [34] to
select “Audio Menu”.
3 Press [1] to go to the next menu and [34] to
select “Advanced Surround”.
4 Press [1] to go to the next menu and [34] to
select “SP 1 Natural” or “SP 2 Enhanced”.
5 Press [ENTER].
ENTER
ENTER
DISPLAY
DISPLAY
1
2
Press once.
Useful functions for playing discs
12
P2-32 e.fm Page 12 Friday, May 13, 2005 4:26 PM