Filter
Top Products
10
RQT8431
Useful functions
Repeat play
(Only when the elapsed play time can be displayed.
For JPEG, you can use even if there is no elapsed time display.)
To repeat a specified section (A-B Repeat)
Except [JPEG] and [RAM] [DVD-RW[‹VR›] (still picture part)
Changing play speed
[RAM] [DVD-RW[‹VR›] [DVD-V]
Enjoying virtual surround (Advanced Surround)
[RAM] [DVD-RW[‹VR›] [DVD-V] [VCD] (2 or more channels)
A surround sound effect can be made using 2 speakers (on other equipment).
≥
When using headphones, press to select “HP 1 Natural” or “HP 2 Enhanced”.
≥
When using discs recorded with surround sound, sound seems to come from speakers on either
side of you.
≥
Optimum seating position is 3 to 4 times the distance between the front left and right speakers or the
width of the television if using the television’s speakers.
≥
Do not use in combination with surround effects on other equipment.
≥
To exit the screen : Press [RETURN].
Press several times to select the content to
repeat.
≥
To exit the screen : Press [RETURN].
Repeat Off
Menu
ENTER
ENTER
A-B Repeat
Menu
DISPLAY
DISPLAY
1
2
Press once.
1
Press [
34
] to select
Other Settings.
2 Press [
1
] to go to the next
menu and [
34
] to select
“Play Menu”.
3 Press [
1
] to go to the next
menu and [
34
] to select
“A-B Repeat”.
4
Press [ENTER] at the starting
and ending points.
≥
Press [ENTER] again to cancel.
≥
To exit the screen : Press [RETURN].
ENTER
ENTER
DISPLAY
DISPLAY
1
2
1
Press [
34
] to select Other Settings.
2 Press [
1
] to go to the next menu and [
34
] to
select “Play Speed”.
3 Press [ENTER] and [
34
] to select
“Normal” or “k0.6” to “k1.4” (in 0.1 units).
4 Press [ENTER].
≥
Press [1] (PLAY) to return to normal play.
≥
After you change the speed
– Advanced Surround (➜ below) and Multi Re-master (➜ page 12) do not work.
– Digital output switches to PCM-2ch.
– 96 kHz sampling frequency is converted to 48 kHz.
≥
This may not work depending on the disc’s recording.
≥
To exit the screen : Press [RETURN].
Press once.
A.SURROUND
A.SURROUND
Press to select “SP 1 Natural” or “SP 2 Enhanced”.
Useful functions
P2-32 e.fm Page 10 Thursday, August 25, 2005 3:26 PM