Filter
Top Products
Packard Bell Vibe 100 Disassembly Manual
8
Fig. 5 The HDD connector.
5. Push the side panel of the top cover gently aside.
6. The mainboard is loose now but the LCD panel is glued to the
front. When removing the mainboard, the LCD screen itself will
hinge. Carefully tear it loose.
7. When re-
inserting the mainboard, avoid pressure on the mainboard
area where the LCD is mounted.
8. When putting back the LCD only press the edges of the screen to
re-glue it to the front panel.
Note The plastic LCD bracket should be properly clicked into the mainboard
before inserting it into the top cover (else there will be too much pressure on the LCD panel
when fixing it inside the casing. (see Fig. 6)
Fig. 6 The LCD plastic bracket