Filter
Top Products
5
Packard Bell Vibe 100 Disassembly Manual
Opening the Casing
To open the player, perform these following steps:
1. Gently pry the bottom and the top cover apart. There is a flat cable
keeping the mainboard and the hard disk together.
Fig. 1 Location of the flat cable
2. Disconnect the flat cable on either end, d
epending on the parts that
need to be exchanged
Removing the Battery
To remove the internal battery, first open the casing (see
Opening the
Casing) and then perform the following steps:
1. Lift up the foil with product specifications on the backside; under
the lower side corners are two screws.
2. Remove the two screws
3. Remove the cover, and lift the battery out, so that its connector is
freely accessible (see Fig. 2).