Onkyo CR-555DAB Portable CD Player User Manual


 
6
Supplied Accessories
Make sure you have the following accessories:
*
In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operations are the
same regardless of color.
Before Using the CD receiver
Note:
If the remote controller doesn’t work reliably, try
replacing the batteries.
Don’t mix new and old batteries or different types of
batteries.
If you intend not to use the remote controller for a long
time, remove the batteries to prevent damage from
leakage or corrosion.
Expired batteries should be removed as soon as
possible to prevent damage from leakage or corrosion.
When you operate the remote controller, point it at the
CD receiver’s remote control sensor, as shown below.
Note:
The remote controller may not work reliably if the CD
receiver is subjected to bright light, such as direct
sunlight or inverter-type fluorescent lights. Keep this
in mind when installing.
If another remote controller of the same type is used in
the same room, or the CD receiver is installed close to
equipment that uses infrared rays, the remote
controller may not work reliably.
Don’t put anything, such as a book, on the remote
controller because the buttons may be pressed
inadvertently, thereby draining the batteries.
The remote controller may not work reliably if the CD
receiver is installed in a rack behind colored glass
doors. Keep this in mind when installing.
The remote controller will not work if there’s an
obstacle between it and the CD receiver’s remote
control sensor.
Remote controller (RC-849S) and two batteries
(AAA/R03)
(Note for China: The battery for the remote controller is not
supplied for this unit.)
Indoor FM antenna (CR-555)
Indoor FM/DAB antenna (CR-555DAB)
AM loop antenna (CR-555)
Power cord
Installing the Batteries
Batteries (AAA/R03)
Using the Remote Controller
A
p
p
r
o
x
.
5
m
CD receiver
Remote control
sensor