Filter
Top Products
24
Using USB interface—Continued
Note:
• Do not connect the CD receiver’s USB port to a USB
port on your computer. Music on your computer
cannot be played through the CD receiver in this way.
• Operation with all USB flash drives including the
ability to power them is not guaranteed.
• Do not connect your USB flash drive via a USB hub.
The USB flash drive must be connected directly to the
CD receiver’s USB port.
• If the USB flash drive contains a lot of data, the CD
receiver make take a while to read it.
Resume Playback
After playback has been stopped, when the Play [ ]
button is pressed to begin playback again, it will resume
playback from the beginning of the file in which it
stopped.
Cancelling Resume Playback
While playback is stopped, press the Stop [ ] button.
“ResumeClear” will appear on the display.
Resume will be cleared even if the following operations
are performed:
• another music file is selected;
• the power cord is unplugged;
• the USB flash drive is unplugged during playback.
Random Playback
With random playback, all of the music files on the USB
flash drive are played in random order.
This mode can only be used while playback is stopped.
Cancelling Random Playback
• To cancel random playback, press the [RANDOM]
button. The RANDOM indicator disappears.
• Random playback is cancelled when the USB flash
drive is removed or the
CD receiver is set to Standby.
Select the type of Repeat Playback
When playing back USB flash drive music files, all files
on the USB flash drive will be played according to repeat
playback ( indicator is already lit up). The type of
Repeat playback can be selected.
Note:
Repeat-1 or 1-Folder playback can’t be combined with
random playback.
Displaying Music File Information
You can display various information about the MP3,
WMA or AAC files currently playing, including ID3
tags such as title, artist name, and album name.
Elapsed time
The length of time that the current MP3, WMA or
AAC file has been playing (default display). If the
elapsed time is more than 99 minutes and 59
seconds, “– –:– –” is displayed.
•File name
•Folder name
•Title name (if ID3 tag present)
•Artist name (if ID3 tag present)
• Album name (if ID3 tag present)
Charging Mode
If you set the “SleepCharge” function to “On”, you can
supply power to the USB device (mobile device)
connected to the CD receiver. If you connect the USB
device (mobile device) while the
CD receiver is in the
standby mode, charging will start and the message
“Charging” appears. The same applies to the case when
the
CD receiver enters the standby mode by pressing the
On/Standby [ ] button.
Tip:
• If you press any of the On/Standby [ ] button,
Open/Close [ ] button and Play [ ] button,
charging will stop.
Note:
• For details of the charging mode, refer to
“SleepCharge” (see page 30).
1
Press the [RANDOM] button.
The RANDOM indicator appears.
2
To start random playback, press the Play
[ ] button.
Press the [REPEAT] button repeatedly to select
the type of repeat playback.
• Repeat playback (default):
indicator appears
• Repeat-1 playback:
Repeats a single selected file.
1 indicator appears
• 1-Folder playback:
Repeat playback of all files in a selected folder.
and 1FOLDER indicators appear.
During playback, press the [DISPLAY] button
repeatedly to display the following music file
information.