Onkyo CR-555DAB Portable CD Player User Manual


 
29
Listening to the Radio—Continued
Press the [TUNER] button repeatedly to select
“DAB”.
Selecting DAB for the Very First Time
The very first time you select DAB, the Auto Scan
function automatically scans the DAB Band III for the
multiplexes (i.e., stations) available in your area. Once
the scanning process is complete, the first station that
was detected is selected.
Using the Auto Scan Function Manually
If a new DAB station is introduced, or you move to a new
area, you can run the Auto Scan function again.
The number of stations found and the scanning progress
are shown on the display.
Displaying DAB Radio Information
Press the [DISPLAY] button repeatedly to display more
information about the selected DAB station.
1. DLS (Dynamic Label Segment)
When tuned to a station that’s broadcasting DLS
text data, the text will scroll across the display.
2. Program Type
3. Bit Rate and Audio Mode
4. Signal Quality
0-59: Poor reception
60-79: Good reception
80-100: Excellent reception
5. Multiplex Name
6. Multiplex Number and Frequency
Preferences
Use the following functions and settings to set up DAB
digital radio.
Tip:
You can also use the [MENU/ENTER] jog dial on the
CD receiver.
DAB Scan
This setting determines which DAB bands are scanned
by the Auto Scan function.
DAB DRC
With the DRC (Dynamic Range Control) setting, you
can reduce the dynamic range of DAB digital radio so
that you can still hear quiet parts even when listening at
low volume levels-ideal for listening to the radio late at
night when you don’t want to disturb anyone.
DAB Mode
With this setting, you can sort the available stations
alphabetically, by active stations, or multiplex.
Listening to DAB Digital Radio
(CR-555DAB)
1
Press the [MENU] button, and then use the
Arrow [ ]/[ ] buttons to select
“TunerSetting”.
2
Press [ENTER].
3
Use the Arrow [ ]/[ ] buttons to select
“DAB Scan”.
4
Press [ENTER].
5
Use the Arrow [ ] / [ ] buttons to select
“U.K” or “World Wide”, and then press
[ENTER] to start the Auto Scan function.
1
Press the [MENU] button, and then use the
Arrow [ ]/[ ] buttons to select
“TunerSetting”.
2
Press [ENTER].
3
Use the Arrow [ ]/[ ] buttons to select the
preference you want to change.
4
Press [ENTER].
5
Use the Arrow [ ]/[ ] buttons to select the
preference’s options.
6
Press [ENTER].
U.K: Band III (11B-12D)
World Wide:
(default)
Band III (5A-13F)
Off:
(default)
Low: Small reduction in dynamic range.
High: Large reduction in dynamic range.
Alphabet:
(default)
Sort stations alphabetically.
Active ST.: Sort by active stations.
Receivable stations appear at the
top of the list. Stations that cannot
be received properly appear at the
bottom of the list.
Multiplex: Sort stations by multiplex.