Olympus DS-3000 MP3 Player User Manual


 
20
Alarm Playback
Function
1
Press the FOLDER/MENU button to
choose a folder.
2
Press the FF/+ or REW/ button to
choose the file to be played when
the alarm sounds.
3
Press the FOLDER/MENU button
for 1 second or longer.
The menu opens ( P.27).
4
Press the FF/+ or REW/ button
until ALARM flashes on the
display.
5
Press the REC/SET button.
The alarm playback setup process begins.
6
Press the FF/+ or REW/ button to
choose between ON and OFF.
ON: Enables alarm playback.
OFF: Disables alarm playback.
7
Press the REC/SET button to
complete the setup screen.
When you choose ON, the alarm mark
lights and the scheduled time setup
process begins. The time indicator will
flash. Step 8
When you choose OFF, the alarm playback
setup process ends, and the alarm mark
disappears. Step 12
The alarm playback function can be set to play
a selected file by pressing any button when
the alarm tone sounds.
System Sounds/Alarm Playback Function
System Sounds
The recorder beeps to alert you to button
operations or warn you of errors. System
sounds may be turned off.
1
Press the FOLDER/MENU button
for 1 second or longer.
The menu opens ( P.27).
2
Press the FF/+ or REW/ button
until BEEP flashes on the
display.
3
Press the REC/SET button.
The system sound setup process begins.
4
Press the FF/+ or REW/ button to
choose between ON and OFF.
5
Press the REC/SET button to
complete the setup screen.
6
Press the STOP button to close
the menu.
Note
If the alarm playback function has been set, the alarm will
sound at the scheduled time even if system sounds are turned
off.
Notes
You cannot append, overwrite, or insert recordings into
locked files.
You cannot set index marks in locked files ( P.19).
Files stored on a SmartMedia card with a write-protect seal
attached to it cannot be locked ( P.4).
Locked files are erased when a SmartMedia card is
formatted ( P.26).
Locking Files