Filter
Top Products
54
Listening to FM radio
MR-F30 Series
Storing frequencies
Storing frequencies manually
1 Receive the desired frequency, then press the button.
2 Push up/down the dial to select “Save Preset,” then press the
OK/EQ button.
3 Push up/down the dial to select the registry number (P1 to P20),
then press the OK/EQ button.
The frequency is stored.
Storing frequencies automatically
1 Press the button while the receiving screen is displayed.
2 Push up/down the dial to select “Auto Preset,” then press the OK/
EQ button.
3 Push up/down the dial to select “On,” then press the OK/EQ
button.
The receivable frequency is stored automatically.
Tip
When “Change Mode” is set to “Manual,” the current frequency can be stored by pressing the OK/EQ
button while receiving FM radio.
Note
If “Auto Preset” is set to “On,” frequency information previously registered will be deleted.
MRF30_E.book Page 54 Tuesday, July 12, 2005 3:04 PM