Filter
Top Products
38
Menu Setting
4
4 Play Menu (Continued)
Reverb
You can enjoy the reverberant sound of various space sizes such as from
the recording studio to the dome.
Setting:
[Normal]: Disables the reverb function. Select this when playing back original
sounds as they are.
[Studio] [Club] [Hall] [Dome]: Select the preferred acoustical environment.
• When playing back WAV format files using these playback results, the sampling rate
and bit rate will be converted downward from 96 kHz to 48 kHz and 24 bit to 16 bit,
respectively.
• This function is only available during playback. This recorder cannot perform
recording by using the playback results.
• When you adjust the various sound quality settings related to playback on the
recorder, the audio output signal sent out from the EAR jack will change as well.
EUPHONY
This recorder is equipped with “EUPHONY MOBILE”, the latest in surround sound
systems which combines bandwidth correction, expansion technology, and virtual
acoustical source processing technology. In addition to its natural, expansive feel, the
recorder is equipped with the exceptional feature wherein listeners are less prone to
developing an compressed or closed-in feel, or to growing tired over extended listening.
On top of this, listeners are less prone to developing an oppressed or closed-in feel, or
to growing tired over extended listening. Level adjustments of the [EUPHONY] setting
can be set to four stages according to preference.
Setting:
[Normal]: Disables this function. Select this when playing back original sounds
as they are.
[Natural]: This mode achieves natural bandwidth correction and acoustical
field expansion.
[Wide]: This mode has an even more expansive feel.
[Power]: This mode focuses more on lower sound registers.
• When playing back WAV format files using these playback results, the sampling rate
and bit rate will be converted downward from 96 kHz to 48 kHz and 24 bit to 16 bit,
respectively.
• This function is only available during playback. This recorder cannot perform
recording by using the playback results.
• When you adjust the various sound quality settings related to playback on the
recorder, the audio output signal sent out from the EAR jack will change as well.
4 LCD/Sound Menu
Backlight
The display will remain lit for about 10 (Initial setting) seconds when a button on the
recorder is pressed.
Setting:
[5 seconds] [10 seconds] [30 seconds] [60 seconds] [Always on]:
Set the length of time that the backlight will remain lit.
[Off]: Disables this function. The backlight will not light up.
Contrast
Display contrast can be adjusted in 12 levels.
Setting:
You can adjust the LCD display contrast level from [01] to [12].
Menu Setting Method