Filter
Top Products
15
Getting Started
1
Inserting and Ejecting a Card
2 3 button
`/
OK
button
When
[MemorySelect] is set
to [SD Card], [Built-in
Memory Selected]
will appear
3
Close the card cover securely.
Note
• Releasing your finger quickly after pushing the
card inward may cause it to eject forcefully out
of the slot.
Ejecting a Card
1
While the recorder is during stop mode,
open the card cover.
• The card is visibly out of the slot and can
be removed safely.
Notes
• It is possible to switch the recording media over
to the built-in flash memory (☞ P.34, P.39).
• In some cases cards which have been format-
ted (initialized) by another device, such as a
computer, cannot be recognized. Be sure to
format them with this recorder before using (☞
P.4 3) .
• When attempting to perform operations such as
rewriting the contents of an SD Card in cases
where the card has been write protected, [SD
Card Locked] will appear. The playback opera-
tion can be performed, but the write protection
must first be turned off when overwriting the
contents on the card.
• Cards that are not to SD standards, such as
multimedia cards, may not be used.
2
Push the card inward to unlock it, and
let it eject partially.
When the SD Card is write protected, there
will be a display reading [SD Card Locked].
Before inserting the card, turn off the write pro-
tection function. Check the Olympus website
regarding SD cards which are confirmed
operation with this recorder (☞ P.65).
If the write protection
switch is facing the
[LOCK] direction,
recording and other
functions cannot be
carried out
About the SD Card
Notes
• The recorder may not recognize correctly
on some SD cards. In this case, remove
the card then put it again to see if the
recorder recognizes the card.
• The processing performance reduces in
a SD card when you repeat writing and
delete. In this case, format the SD card
(☞ P.43).
LOCK