Olympus 8100PC MP3 Player User Manual


 
12
--
2 Press the 9 or 0 button adjust the start/stop
actuation level.
The VCVA level can be set to any of 15 different values.
The higher the value, the more sensitive the recorder to sounds.
At the highest value, even the faintest sound will activate
recording.
Notes:
• The start/stop actuation level also varies depending on the selected
microphone sensitivity mode.
• If the starting level is not adjusted within 2 seconds, the display will return to the previous.
• To ensure successful recordings, prior testing and adjustment of the start/stop actuation level is
recommended.
• If the [Rec Scene] is set to a setting other than [Off], the [VCVA] function will not be available.
Set [Rec Scene] to [Off] to use this function.
h Play Menu
Rec Scene
The recording setting can be selected from the [Memo], [Meeting],
[Conference] templates to suit the recording scene or situation. You can
also save a recording setting of your choice.
1 Select [
Rec Scene
] from the menu on the
[
Rec Menu
].
2 Press the
+
or
button to select the item to set, and
then press the `
OK/MENU
or 9 button.
In Menu mode selection:
When [
Scene Select
] is selected:
Press the + or button to select the recording scene you want to set,
and then press `OK/MENU button.
[Off]: Disables this function.
[Memo]: Suitable for dictation.
[Meeting]: Suitable for recording meetings.
[Conference]: Suitable for seminars with a small number of
people.
[User Setting]: Recording with menu settings saved using
[Scene Save].
a Rec Scene indicator
When [
Scene Save
] is selected:
Press `OK/MENU button.
You can save the current [Rec Menu] menu settings in [User
Setting].
• To change the [Rec Scene], return the screen to [Scene Select] by
pressing and holding the FOLDER/INDEX/SCENE button for 1 second
or longer while the recorder is during stop mode.
Note:
If the [Rec Scene] is set to a setting other than [Off], the menu settings for the recording functions
will not be available.Set the [Rec Scene] to [Off] to use these functions.
a
Voice Filter (For VN-8100PC only)
The recorder has a Voice Filter Function to cut low and high frequency
tones during normal, fast, or slow playback, and enable clear audio
playback.
1 Select [
Voice Filter
] from the menu on the
[
Play Menu
].
In Menu mode selection:
[On]: Enables the Voice Filter function.
[Off]: Disables this function.
a Voice Filter indicator
a
Play Mode
You can select the playback mode that fits your preference.
1 Select [
Play Mode
] from the menu on the
[
Play Menu
].
In Menu mode selection:
When [
Play Area
] is selected:
[File]: Stop after playing back the current file.
[Folder]: Play files continuously in the current folder until the last
file and stop.
When [
Repeat
] is selected:
[Repeat]: Sets to repeat playback mode.
[Off]: Disables this function.
a Playback mode indicator
a