Filter
Top Products
42
Northstar NS100
Call back using the call log data
You can use the call log to quickly display
details about the 20 most recent incoming
calls, so that you can call any of them back.
You can also save an entry in your buddy list,
or delete an entry.
1. Press CALL to display the fi rst three options
of the DSC CALL menu.
2. Scroll through the options and move the
cursor to CALL LOG. Press >ENT. The details
of most recent incoming call is shown as the
fi rst entry (01) in the call log.
DSC CALL
GROUP
ALL SHIPS
>CALL LOG
01 NS100
INDIVIDUAL
ROUTINE
10:45PM LOC
NS100
>CALL BACK
DELETE
SAVE
3. Use ^CH/SELv to scroll through the log
and locate a particular entry. Press >ENT to
continue.
4. Press >ENT again to confi rm the call back
OR
to delete or save the entry in your call log,
scroll to the desired option and then press
>ENT.
Request the LL position of a buddy
DSC CALL
CALL LOG
DISTRES LOG
>LL REQUEST
ALEX
LL REQUEST
ENT>SEND?
ALEX
LL REQUEST
CALLING..
LL REQUEST
>ALEX
JEAN
BILL
POSITION ACK
ALEX
ESC->EXIT
PORT OPS/VTS
ALEX
LL REQUEST
WAITING ACK
PORT OPS/VTS
N 39 27.021’
E135 12.011’
T 09:34 UTC
You can use this option to contact a buddy
and ask for their position. For example, if your
buddy is in a good fi shing spot, your buddy
can send you the position in confi dence, rather
than revealing it over an voice channel.
1. Press CALL to display the fi rst three options
of the DSC CALL menu.
2. Scroll through the options and move the
cursor to LL REQUEST. Press >ENT.
3. Press >ENT to select the fi rst buddy in your
buddy list, or scroll through the other entries
until the cursor is next to the buddy whose
position you want to check and then press
>ENT.