Filter
Top Products
36
Northstar NS100
Enter your ATIS ID
LOCAL/DIST
USA/INT/CAN
GPS/DATA
>DSC SETUP
DSC SETUP
LL REPLY
DSC FUNC
>ATIS ID
INPUT USER
ATIS ID
9________
987654321
ATIS ID
ENT>STORE
ESC>CANCEL
USERATISID
INPUT AGAIN
_________
987654321
ATIS ID
ENT>STORE
ESC>CANCEL
If you are navigating inland waterways within
Europe, you must enter your ATIS ID to access
ATIS functionality. ATIS will send a digital signal
anytime you release the PTT key.
1. Select DSC SETUP and press >ENT.
2. Move the cursor to ATIS ID and press >ENT.
If this is the fi rst time that you are entering
your ATIS ID, a dashed line appears with 9
shown as the fi rst number. Note that an ATIS
ID always starts with 9.
3. Enter the rest of your ATIS ID numbers along
the dashed line. The cursor automatically
moves to the next space after you enter each
number.
Turn the ATIS functions on/off
LOCAL/DIST
USA/INT/CAN
GPS/DATA
>DSC SETUP
DSC SETUP
DSC FUNC
ATIS ID
>ATIS FUNC
ATIS FUNC
>ON
OFF
1. Select DSC SETUP and press >ENT.
2. Move the cursor to ATIS FUNC and press
>ENT.
3. Press >ENT again if you want to turn the
ATIS functions ON and the ATIS symbol will
appear on the LCD screen to confi rm that
your vessel has ATIS functionality,
OR
move the cursor to OFF and then press <ENT
to turn ATIS functionality OFF.
NOTE: It is not possible to have ATIS and DSC
operating simultaneously. When you turn one
ON, the other will turn OFF. If they are both off,
you must turn on DSC to get DSC functionality.
If you make an error, press <ESC to clear all
the numbers you have entered so far and
return to the DSC SETUP menu, so that you
can start again.
4. When you have entered your ATIS ID
correctly, press >ENT.
5. You must reenter your ATIS ID again as a
check, then press >ENT again to permanently
store your ATIS ID in the radio.
You can view your ATIS ID any time by
selecting ATIS ID in the DSC SETUP menu.
WARNING!
This is a once-only
operation. You can
display and read your
ATIS ID at any time,
but you only get one
opportunity to store it
in the radio. You cannot
change it after you
have stored it.
Inland waterways rules
require 1W Tx power
on channels 06, 08, 10,
11, 12, 13, 14, 15, 17,
71, 72, 74, and 77.