NorthStar Navigation Northstar NS100 Portable Radio User Manual


 
35
Reference Manual
Select your response to LL polling calls
LOCAL/DIST
USA/INT/CAN
GPS/DATA
>DSC SETUP
DSC SETUP
GROUP SETUP
INDV REPLY
>LL REPLY
LL REPLY
>AUTO
MANUAL
OFF
Another boat may send an LL polling request
to ask for your boat's position. You can choose
to respond to an LL polling request in one of
three ways:
AUTO will automatically send your boat's
position in response to any incoming LL
polling requests from your buddies.
MANUAL means that you choose whether
or not to reply to any incoming LL polling
requests.
OFF ignores all LL polling requests.
1. Select DSC SETUP and press >ENT.
2. Move the cursor to LL REPLY and press
>ENT.
3. Select your response, then press >ENT again
to return to the DSC SETUP option.
Turn the DSC functions on/off
LOCAL/DIST
USA/INT/CAN
GPS/DATA
>DSC SETUP
DSC SETUP
INDV REPLY
LL REPLY
>DSC FUNC
DSC FUNC
>ON
OFF
1. Select DSC SETUP and press >ENT.
2. Move the cursor to DSC FUNC and press
>ENT.
3. Press >ENT again if you want to turn the
DSC functions ON,
OR
move the cursor to OFF and then press <E NT
to turn the DSC functions OFF.
It is not possible to have both of DSC and ATIS
operating simultaneously. When you turn one
ON, the other will turn OFF. If they are both
OFF, you must set DSC FUNC to ON to get DSC
functionality.
SPECIAL NOTE:
The DSC or ATIS annunciator in the LCD will
illuminate if DSC or ATIS is fully operational.
WARNING!
You can turn OFF the
DSC functions, but this
is not recommended
because you won’t be
able to automatically
transmit coded
information about
your boat to the
GMDSS in a distress
situation.