Filter
Top Products
8
Listening to radio
1 Press the RADIO ON / BAND button to switch on the radio.
2 Press the RADIO ON / BAND button to select FM, MW.
3 Press the UP or DOWN buttons to manually set to your desired station.
4 Adjust the VOLUME control to your desired listening level.
FM wire aerial
To obtain the maximum FM reception fully extend the wire FM aerial (which is
located at the rear of the unit) and alter the direction of the wire for best results.
The aerial for the MW waveband is located inside the unit. To obtain the
maximum MW reception rotate the cd clock radio.
Automatic station search
1 Press and hold the UP button until ‘UP’ is displayed on the display panel and
it will automatically search up the radio frequency.
2 Press and hold the DOWN button until ‘DN’ is displayed and it will
automatically search down the frequency.
Radio presets
1 Refer to ‘listening to the radio’ to tune to the desired radio station.
2 To store the frequency into the memory, press PRESET / SET button, the
preset station number will be automatically assigned the next available
number and will appear on the display.
3 Press the PRESET / RECALL to select another preset location.
4 Press PRESET / SET to confirm your settings.
Radio frequency tips
• There is a maximum of 11 (10 preset locations and 1 alarm memory location)
preset stations that can be stored.
• You can also overwrite preset station numbers by pressing PRESET / SET
button when listening to the chosen station. Press the PRESET / RECALL
button to select the preset to be overwritten and then press PRESET / SET
again to confirm.