Filter
Top Products
Maintenance
Do not expose your cd clock radio to extremes of temperature. The product should
be kept in a warm environment free from dust and damp. For external cleaning
use only a soft, clean, damp cloth. Use of detergents may damage the finish.
Technical specification
AC Power supply : 230V 50Hz
Battery back-up : 9V DC type 6LR61/PP3 (not included)
CD player : Frequency response (60dB) 30Hz to 20kHz
Laser : = 780nm Max power = 2mW
Radio : FM 87.5MHz - 108MHz
: MW 531KHz - 1611KHz
Earphone jack socket : 3.5mm diameter
WARNING : This unit uses a laser beam. To prevent an accident occuring the
unit should only be opened by a qualified engineer. If the door interlocks become
defective the laser may cause invisible radiation. Avoid exposure to the beam.
If there is a scratch, dirt or finger prints on the cd, it may cause tracking errors.
Before playing, clean the cd with a clean cloth. Wipe the cd from the centre
outwards. After playing, store the disc in its cd case.
The cd clock radio is for indoor use only.
Earphones
When connecting earphones to the earphone socket, the built in loudspeaker is
automatically switched off. Do not plug in the earphones when the alarm buzzer is set.
VENTILATION WARNING
The normal ventilation of the product shall not be impeded for intended use.
11