Filter
Top Products
24
DVD OPERATION
Press the POWER button on the main unit
to turn on the unit.
2
1
1
Press the OPEN button to open the disc
tray, “OPEN” will appear on the screen.
Insert a disc with the label side facing up on
the disc tray.
2
1
2
PLAYBACK OF A DVD
IMPORTANT NOTES:
• After plugging in, the unit will be in the Power Off mode. Press the Power button on the
main unit to turn on the unit.
• “ ” will appear on the screen during operation if you try to access a function that is
not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will
appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc,
position it with the printed title side facing up, align it with the guides and place it in its
proper position.
• It is important that you read the manual that accompanies the DVD disc as there are
features that are on this DVD player that cannot be used with certain DVDs. There are
also extra features that are different for each DVD disc, so they are not explained in this
owner’s manual.
• If the unit is in the Stop mode, Pause mode or if there is no disc in the disc tray, the
screen saver will appear on the screen after three minutes.
CONTINUED ON THE NEXT PAGE