Filter
Top Products
18
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
EXTERNAL MEMORY CARD
TO AVOID DAMAGE, make sure the unit is off before
inserting or removing the card.
1. Insert a SD/MMC memory card (not included) up to
1GB, label side facing the rear of the player, as
shown in Figure 1. Make sure that the card clicks
into place.
2. Connect the USB cable as described previously.
3. Drag MP3 and WMA files into the SD/MMC memory
card's "Removable Disk" window.
NOTE: A WMA file with DRM 9 will not playback if you
directly drag and drop it into the “Removable Disk”
window. See page 16 for transferring WMA files with
DRM 9 from the computer to your player. Also, if the
SD/MMC card is inserted, WMA files with DRM 10 will
not playback. Make sure there is no SD/MMC card
inserted and see page 16 for transferring WMA files
with DRM 10 from the computer to your player.
4. To remove the SD/MMC memory card,
turn the unit
off, then push the edge of the card and the card will
spring out. Carefully remove the card, as shown in
Figure 2.
NOTE:
• If the external card is inserted, removed or replaced, the unit will search the music
files to update the index when the unit is turned on again.
• While the player is on, if the SD/MMC card is removed or inserted, “Unload the
Card?” or “Load the card?” will appear in the display. Press the Navigation control
towards
m or l, then press the Navigation control to select YES to unload or load
the SD/MMC card to update the player. Otherwise, the SD/MMC card’s music files
will not be played.
Figure 1
Figure 2