Filter
Top Products
Screen and DVD/CD Functions
7
Dome Light Switch
Screen’s Wireless
Transmitter Module
Screen’s Wireless Transmitter Module
The audio signal is transmitted via infrared light to
the optional headphones.
Screen’s Dome Light
Optional IR Headphone
Model: HP-400
Dome Lights
Changing to an Auxiliary Input Source
Connect the A/V cable provided to the auxiliary A/V
device (connection may require a male-to-male RCA
patch cord not supplied). Match the color connectors
as enclosed (Yellow = Video In, Red = Left Audio In ,
White = Right Audio In). Insert the remaining “pin
plug” end of the A/V cable to the “IN” port on the left
side of the screen housing. The screen image will
change to the new A/V device automatically.
Removing the A/V plug will switch the screen back to
the DVD player.
Dome Lights
Off
Dome Lights
Activated by
Opening the
Vehicle’s Door
Dome Lights
On
Dome Light’s 3-Position Switch
Restore Factory Default Setting
1. Press the MENU button on either the remote or the
screen housing to activate the monitor adjustment
menu.
Use the UP and DOWN buttons on either the
remote or the screen housing to select Recall
.
2. Press the MENU button again to restore factory
default setting.
3. Select EXIT in the menu or wait 10 seconds and
the menu will automatically disappear.
MV1025-UM.qxp 7/6/06 16:11 Page 7