Magnadyne MV1025 Portable DVD Player User Manual


 
14
Only qualified service personnel can remove the
cover or service this player. Otherwise the warranty
will become invalid.
No Power:
Check to see if the player is “On”.
Check to see that the power plug of the main unit
is properly connected.
Check to see if that power to the outlet is properly
working.
No Picture:
Check to see that the monitor is switched “On”.
Check that the correct Mode is selected (DVD or
AV) by pushing the MODE button.
Check the audio/video in connection.
Distorted Picture:
Check the disc for fingerprints and clean with soft
dry cloth, wiping from center to edge.
A small amount of picture distortion may appear.
This may not be a malfunction.
No Sound:
Check audio connections.
Be sure the headphones are turned on, some
headphones automatically shut off.
Be sure the headphone batteries are not depleted.
Check the volume and mute setting on both the
monitor and headphone.
Disc Does Not Play:
Ensure the disc label is facing up.
Clean the disc.
Check to see if the disc is defective by trying
another disc.
The disc format is not supported by this unit.
The Player Does Not Respond to the Remote Control:
Aim the remote control directly at the sensor on
the front of the housing.
Avoid all obstacles which may interfere with the
signal path.
Inspect or replace the remote control batteries.
Check that the battery is inserted correctly.
Buttons Do Not Work:
Press POWER to turn “Off” the unit, then press it
again to turn “On” the unit.
Volume different for DVD and CD:
This is due to different recording methods
Troubleshooting
MV1025-UM.qxp 7/6/06 16:11 Page 14