13
Power Harness Wiring:
The 5 wire harness provides battery and 12 volts igni-
tion as well as a chassis ground. Route the power
harness to the point in the vehicle that you will make
the connections.
Green Wire: The green wire in the harness should be
connected to a +12 volt power wire that is turned
on and off by the ignition key.
Red Wire: The red wire in the harness should be con-
nected to a constant +12 volt wire that is NOT
turned on and off by the ignition key.
Black Wire: The black wire in the harness should be
connected to the chassis of the vehicle using a
ring terminal and self tapping screw or bolt and
nut.
Gray Wire: Connect to the common trigger wire com-
ing from all door pin switches (-).
White Wire: Connect to the common trigger wire
coming from all door pin switches (+).
Audio/Video Input Jack:
You may connect video games, camcorders and
other portable video equipment to the MV1025.
Connect the optional device by using the color-coded
external auxiliary harness.
Yellow RCA Connector: Video input.
Red RCA Connector: Audio input right.
White RCA Connector: Audio input left.
Note: The unit is supplied with only one color-coded
external auxiliary harness.
Audio/Video Output Jack:
You may output video/audio to an optional monitor.
Connect to the optional monitor by using the color-
coded external auxiliary harness.
Yellow RCA Connector: Video input.
Red RCA Connector: Audio input right.
White RCA Connector: Audio input left.
Audio Output Harness:
You may output audio to an FM transmitter.
Red RCA Connector: Audio output right.
White RCA Connector: Audio output left.
Wiring Instructions
Specifications
Supply Voltage: 12V DC, Negative Ground
Viewing Angle: Up to 135 degrees
Screen Format: 16:9
Resolution: 800 x 480 pixels
A/V input: 1
A/V output: 1
Compatible Discs:
DVD-Video Disc: DVD 8cm or 12 cm disc
(single/double-sided discs)
Compact Disc: CD 12 cm disc
MP3: MP3 12 cm disc
IR Transmitter:
Built-In
Dimensions (mm): 300mm (w) x 280mm (d) x 55mm (h)
MV1025-UM.qxp 7/6/06 16:11 Page 13