Filter
Top Products
Using FM transmitter
To use the FM transmitter for audio:
1. Press and hold MENU on the remote control for more than one second. The
Operation MENU opens.
2. Press MENU repeatedly to select FMT Freq, then press the < and > buttons
to change the frequency.
3. Exit the menu.
Tune a nearby FM radio (such as your car stereo or FM radio headphones) to
the frequency you set in Step 2. Audio from the player is received by the FM
radio.
Using the OSD menu
Press SETUP on the remote control, the OSD menu opens.
Menu
Description
TV DISPLAY: modifies the display if it doesn’t match the width to
height ratio the DVD uses. You can select from the following:
·NORMAL/PS
·NORMAL/LB
·WIDE
ANGLE MARK: Selects a different angle if the back of the
DVD jacket contains a multiple angles icon. You can select ON
or OFF.
OSD LANG: Selects a language for DVD play menu. You can
select from following:
·ENGLISH ·FRENCH ·SPANISH·ITALIAN
CAPTIONS: Selects the caption for DVD play. You can select
ON or OFF.
SCREEN SAVER: Protects the screen if it paused about 5
minutes. You can select ON or OFF.
General setup page
LOGO TYPE:
Selects different start LOGO picture. You can
select Default and LOGO Captured.
DOWNMIX: Applies to Dolby digital sound. You can select
from following:
·LT/RT ·STEREO
DUAL MONO: Selects the different channels of sound. You
can select from following:
·STEREO ·L-MONO ·R-MONO ·MIX-MONO
Speaker setup page
DYNAMIC:
Selects the different rating level of dB. You can
select from following:
·FULL ·3/4 ·1/2 ·1/4 ·OFF
24