Filter
Top Products
4
Mixer or
Preamplifier
Right
Line level
Output
Left
Line level
Output
1202-VLZPRO
Stereo
Power Amplifier
C300
C200
INPUT THRU
PARALLEL
SERIAL NUMBER
MANUFACTURING DATE
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA
MANUFACTURED IN CHINA • FABRIQUE AU CHINE • COPYRIGHT ©2003
THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.:
"MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING
C200
INPUT THRU
PARALLEL
SERIAL NUMBER
MANUFACTURING DATE
DESIGNED BY MACKOIDS IN WHITINSVILLE, MA AND WOODINVILLE, WA, USA
MANUFACTURED IN CHINA • FABRIQUE AU CHINE • COPYRIGHT ©2003
THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF LOUD TECHNOLOGIES.:
"MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING
HOOKUP DIAGRAMS
2. Connect the “Speaker Output” from
your power amplifier (or powered mixer)
to the
INPUT
connector on the C200.
3. Turn on your mixing console (or other
signal source).
4. Turn on the amplifier. Turn up its
volume or gain control(s) as recom-
mended by the manufacturer.
5. Start the signal source, whether it be
speaking into a microphone or starting a
CD player. Adjust the volume controls
on the mixer (or other signal source) for
normal operation.
Quick Start
Make all initial connec-
tions with the power
switches OFF on all
equipment. Make sure all
master volume, level, or
gain controls are all the way down.
1. Connect the line-level outputs from
your mixing console (or other signal
source) to the inputs of your power
amplifier.
C200: WITH A MIXER AND POWER AMPLIFIER
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS
2 PER POWERED MIXER OR AMPLIFIED CHANNEL
POWERED MIXER
C200: WITH A MACKIE POWERED MIXER, AND USING THE THRU JACK