Filter
Top Products
10
C200 SPECIFICATIONS
System Specifications
Frequency Response (–3 dB)
89 Hz – 20 kHz
Frequency Range (–10 dB)
59 Hz – 22 kHz
Maximum SPL Long-term @ 1m 118 dB
Low-Frequency Crossover Type
6 dB/octave, time offset corrected
High-Frequency Crossover Type
12 dB/octave
Crossover Frequency 1800Hz
Audio
Input Type Speakon®-style
1/4-inch TS phone jack
Input Impedance 8 ohms
Power Handling
RMS: 200 watts
Music: 350 watts
Peak: 500 watts
Operating Temperature Range
–10ºC to 45ºC
(14ºF to 113ºF)
Transducer Specifications
Low-Frequency Transducer
Diameter 10 in/250 mm
Voice Coil Diameter 2.0 in/51 mm
Sensitivity (1W@1m) 96 dB
Frequency Range 59 Hz – 3000 Hz
High-Frequency Driver and Horn
Diaphragm Diameter 1.4 in/36 mm
Horn Exit Diameter 1 in/24.5 mm
Diaphragm Material Titanium
Sensitivity (1W@1m) 104 dB
Frequency Range 1000 Hz – 20,000 Hz
Horn Type
Composite: Exponential and Conical
Mouth Size
12 in/305 mm W x 7 in/178 mm H
Horizontal Coverage
90º (1 kHz – 20 kHz)
Vertical Coverage
80º (1 kHz – 20 kHz)
Safety Features
Driver Protection
Dynamic protection for compression driver
Construction Features
Basic Design Asymmetrical Trapezoidal
Material Polypropylene
Finish Grey, textured finish
Handles One on left side, one on top
Grille Perforated metal with weather-
resistant coating
Physical Properties
Height 20.75 in/527 mm
Width 13.10 in/333 mm
Depth 12.25 in/311 mm
Weight 26.0 lb/11.8 kg
Mounting Methods
Optional accessory plates for top
and bottom of enclosure
Disclaimer
Since we are always striving to make our
products better by incorporating new and improved
materials, components, and manufacturing methods,
we reserve the right to change these specifications at
any time without notice.
“Mackie” and the “Running Man” figure are
registered trademarks of LOUD Technologies Inc.
All other brand names mentioned are trade-
marks or registered trademarks of their respective
holders, and are hereby acknowledged.
©2004 LOUD Technologies Inc.
All Rights Reserved.