Filter
Top Products
16
When an
ACK is received, the distress mode is automatically can-
celed and communication will be on Ch. 16.
Last Call
You can send a last call by following this sequence:
1. Use the ↑ ↓ keys to select a simplex-working channel. The radio will
default to Ch. 16 if a duplex channel is selected. (If you press the call
key during
WX CHANNEL MODE, the last used channel is displayed.)
2. Press the
CALL key.
3.
LAST blinks.
4. Press the CALL key to transmit.
If there is no last call information stored, an error beep sounds. If the
last call is a MMSI number stored in your directory, the number's di-
rectory location will be displayed below the
ID ANNUNCIATOR. After the
radio you're calling acknowledges the call, communication will be es-
tablished as soon as you press the
PTT button.
New Call
This procedure allows you to place an individual call.
1. Press the
CALL key once. LAST blinks.
2. Use the ↑ ↓ keys to select
NEW CALL.
3. Press the CALL key again. You can now enter the MMSI number.
NOTE:
New call MMSI numbers are not stored. They are for temporary
use. You must enter them into your directory to have the numbers
stored permanently.
Last
Call
Last caller
is No.4 in
Directory