Filter
Top Products
7 -
Welcome
Cleaning
Only clean your DVD-Preceiver with a damp, soft, clean cloth (with no aggres-
sive cleaning agents).
If DVD-Preceiver fails to read the disc correctly, the reader unit in the device
may be soiled. Use a commercially-available cleaning disc.
Always keep the disc drawer closed to prevent dust getting into the drawer
and onto the lens.
For your safety
For your own safety and to avoid unnecessary damage to your unit, please read
and follow the safety advice below:
This DVD-Preceiver is only to be used for receiving, displaying and playing
visual and sound signals.
Switch off your DVD system (Centros, TV and any other audio components
which may be connected) before connecting or disconnecting other devices or
speakers.
Do not open up the hous-
ing, or you could be directly exposed to the laser beam. The laser beam will be
visible if the unit is open.
DO NOT LOOK INTO THE LASER BEAM.
Protect your DVD-Preceiver from:
liquids and damp
shock and mechanical stress
magnetic and electrical elds
cold, heat, direct sunlight and extreme uctuations in temperature
dust
anything which obstructs ventilation
manual interference with the unit‘s interior
Your Auro has only been designed for use in a domestic environment. The war-
ranty covers this normal use of the DVD-Preceiver.
•
•
•
•
•
•
•
•
•
•
•
•
•
PLEASE NOTE: TO AVOID RISK OF ELECTRICAL SHOCK, DO NOT REMOVE THE
COVER (OR THE REAR OF THE UNIT). THERE ARE NO PARTS INSIDE THE UNIT
THAT CAN BE REPAIRED BY THE USER. REPAIRS SHOULD ONLY BE CARRIED OUT
BY A LOEWE DEALER.
If you have moved the DVD-Preceiver from a cold to a warm environment,
leave it to stand for about an hour because of the risk of condensation building
up. Do not switch it on until it has reached room temperature. This will avoid
seriously damaging the components.
Read this operating manual, and experiment with your new equipment‘s features
so that you are familiar with it.
Advantages of connection to a Loewe TV set
If you connect your Auro to a Loewe TV, you are able to enjoy the Loewe system
communication ”L-Link”. With L-Link, Auro and your TV join forces in an intel-
ligent network and form a high-performance home cinema system.
Auro and the TV exchange data via the L-Link, among other things to check
whether audio data are available (screen stays off) or whether audio and video
data are available (screen switches on automatically).
Thanks to L-Link your TV assumes that Auro will take over processing of all audio
signals within the equipment network. The Auro switches on automatically when
you switch on the TV.
You can operate the whole equipment network with ”one hand” using the Assist
remote control.
Technical requirements for L-Link
Loewe TV of chassis generation Q/S/P25xx TV software as of Version 6.0; if
your TV is equipped with an older software, please contact your Loewe dealer
for a software update
• L-Link cable connection must be established in a powerless state; see page
8/9.
Auro must be connected to the Euro AV-input AV2/3 of the TV; see page 9.
•
•
•