Filter
Top Products
15 -
About operation
Auro is a DVD-Preceiver. It covers the scope of functions of a DVD player
(”DVD/CD”) and a radio receiver (”Tuner”) for medium wave (AM) and VHF (FM).
Processing and transfer of the audio signals take place in a pre-amplier with
different decoders. This allows you to set various sound modes – depending on
the format of the sound source (e.g. DVD, Tuner, TV …).
You can switch between the sub-devices by either pressing the
Source
button
on Auro or by making the appropriate setting on the remote control. When you
switch over with the buttons on Auro, you must set the RC4A to the correspond-
ing remote control mode. There is no need for this adaptation of the Auro and
the remote control when you switch with the remote control. Therefore, we
recommend you to switch between the sub-devices with the remote control.
When you select the operating mode with the buttons
, the appropriate device is switched on unless it already was.
You can operate the various Loewe units with the RC4A remote control (see page
41).
Operation of the Auro with a DVD inserted is described in this chapter. Operation
is performed with the remote control.
When you insert a DVD in Auro (see pg. 19), you can follow the description
below on your remote control.
Activate the mode of the remote control
Set the remote control to DVD Preceiver mode.
Inserting a disc
Press the button on the device.
The disc drawer is opened, OPEN appears in the Auro display.
Place the disc in the drawer with the labeled side up.
Press the button on the device.
The drawer is closed.
The Auro display then changes to READING . The media
type is displayed (the
DVD
symbol lights additionally for a
DVD).
The intro start playing when you insert a DVD. Then, the DVD’s
own user interface is displayed (see pg. 18).
Basic functions
The basic functions are:
Start playback; button
Pause (single frame); button
Stop; button
Short key press: Go to beginning of chapter
Long key press: Search
Play
A message appears on the screen after calling a basic
function. Auro therefore conrms that it has executed the called function, here,
for example, after pressing the for play.
Note: Even if the remote control is in the ”RADIO” mode you can start playing
a disc with the button. The remote control then changes automatically
to the ”DISC” mode, Auro is switched over to the ”DVD/CD” sub-device, and
playback of the disc begins.
Function not possible
If this message appears, you have pressed a button
which currently has no function.
These messages are hidden automatically after 8 seconds. To hide it earlier: Press
the button .
User interface
Every operating mode (DVD, Audio CD, etc.) has its own menu bar and own
menu.
Menu bar
Call the menu bar, for example, if you want to use the DVD beyond its basic
functions. The DVD menu bar consists of eight elements. Each of these elements
stands for a function. Call the menu bar with the button:
1/2
x4
T
1/3
1 Eng
3/9
1 Deu
D
Auto
Select title (see page 20).
Select chapter (see page 20).
Select sound format (see page 22).
Select subtitles (see page 26).
Camera position (see page 22).
Repeat (see page 23).
Zoom (see page 23).
Sound mode (see page 41).