Filter
Top Products
- 18
About operation
User interface of the inserted DVD
Two userinterfaces are available for operating DVDs: the Auro interface and the
DVD interface itself. Both interfaces are totally independent of each other.
The DVD’s own interface is visible after inserting the DVD and running the intro
with which most DVDs are equipped.
You can call the DVD’s own interface at any time during DVD playback.
Select Disc Menu with TEXT.
Sleep timer
With the sleep timer you can set the Auro to switch off automatically after a set
time.
Press the button Timer.
SLEEP 120 appears in the Auro display. The sleep timer is switched on,
Auro will switch off automatically after 2 hours.
You can change the time for automatic switch-off by repeatedly pressing.
The
SLEEP
symbol lights up in the display while the sleep timer is active.
To switch off the sleep timer:
Press the button Timer.
Press the button repeatedly until SLEEP OFF appears in the Auro display.
This switches the sleep timer back off.
Note: The sleep timer function is also available in tuner mode.
Numeric input
A one or several digit number has to be entered for some functions. The follow-
ing rules apply here:
one digit number
either keep numeric button pressed for one second, then, this number is sent
to Auro or
press the numeric key briey; the number is transferred to Auro after two
seconds.
several digit number
press the respective numeric buttons briey.
•
•
•
Automatic functions
Resume
When you interrupt playback of a DVD, Auro remembers where. When you
switch Auro back on and no other disc has been inserted in the meantime,
playback continues at the point where it was interrupted.
Screen saver
The screen saver switches on when playback of a DVD is interrupted for ve
minutes. The background picture is dimmed.
Change to standby mode
When the screen saver is active and no operation takes place for 15 minutes,
Auro automatically switches to standby mode.
Five seconds to save
When you have switched Auro off, it cannot be switched back on again for ve
seconds. Auro needs these ve seconds to save the current settings after switch-
ing off.