Filter
Top Products
Before enjoying DVD/Video CD/CD
The on-screen menu language of your player
has been factory pre-set to English. If you
want to change the menu language to other
language, please refer to "Initial settings /
General setup / OSD LANGUAGE". In the
explanation below it is assumed that English
has been selected as menu language.
Basic play
1. Switch on the POWER to the “ON” position
at the right side of the player to turn on the
player.
NOTE: 1).Make sure that all the connections
including connections to AC adapter, other
AV equipment etc. have been done before
switch the POWER switch to the "ON" position.
2).After switch the POWER switch to
the "OFF" position, if you want to switch it to the
"ON" position again, you should wait at least 2
seconds, otherwise some abnormal
phenomenon may appear, in this case, please
turn the unit off then turn it on, it will work
normally again.
2. Push the disc cover up to open it.
3. Place a disc onto the disc compartment. Hold the disc without touching either of its surfaces, position
it with the printed title side facing up, align it with the guides, and place It in its proper position.
4. After closing the disc cover, play begins. The player starts to read the disc immediately.
5. When a menu screen appears on the screen, move navigation buttons or press the numeric
buttons to select preferred chapter number, then press ENTER button to play the chapter.
6. Press PREV or NEXT button to play the previous or next chapter.
7. To stop play and return to the menu screen, press TITLE button or MENU button.
13