La Crosse Technology WT-5360U Clock Radio User Manual


 
8
F. 12/24-HOUR CLOCK SETTING
1. Hold down the “MODE/MIN” button for 3 seconds; the time zone will appear flashing at
the bottom of the LCD.
2. Press and release the “SNOOZE” bar 5 times to advance to the 12/24-hour clock
setting.
3. Press and release the “MODE/MIN” button to select either a 12-hour clock or a 24-
hour clock.
4. Press and release the “SNOOZE” bar to confirm selection and advance to the Indoor
Temperature Display.
G. INDOOR TEMPERATURE DISPLAY
1. Hold down the “MODE/MIN” button for 3 seconds; the time zone will appear flashing at
the bottom of the LCD.
2. Press and release the “SNOOZE” bar 6 times to advance to the indoor temperature
display setting.
3. Press and release the “MODE/MIN” button to select either Fahrenheit or Celsius
(Fahrenheit is the default).
4. Press and release the “SNOOZE” bar to confirm selection and advance to Daylight
Saving Time setting.
H. DST (DAYLIGHT SAVING TIME) SETTING
Note:
The DST default is “On”, meaning that the WWVB will automatically change the time
according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST
changes (Arizona and parts of Indiana) turn the DST “OFF”.
1. Hold down the “MODE/MIN” button for 3 seconds, the time zone will appear flashing at
the bottom of the LCD.
2. Press and release the “SNOOZE” bar 7 times to advance to the DST setting.
3. “DST” will appear in the indoor temperature section of the LCD, and “ON” or “OFF” will
flash in the time section.
4. Press and release the “MODE/MIN” button to toggle between DST ON and OFF.
5. Press and release the “SNOOZE” bar to confirm the DST setting and complete the
set-up sequence.
IV.
FEATURES & OPERATIONS
A. FEATURES
1. Radio Controlled Time
2. Time Projection
3. LED Backlight
4. Indoor Temperature
5. Time Alarm
6. Calendar
7. Second Display
B. RADIO CONTROLLED TIME
1. The projection alarm will automatically search for the time signal upon initial set-up
and every night.
2. When the signal is being received, there will be a “tower” icon flashing to the left of the
time display.