Filter
Top Products
4
I. QUICK SET-UP GUIDE
Hint: Use good quality alkaline batteries
and avoid rechargeable batteries.
1. We recommend beginning the set-up procedure at night when the
WWVB signal is easiest to receive.
2. It is also highly recommended to set the projection alarm in a window
or other area free of interference in the area of your home that is
closest to Colorado (the source of the WWVB signal).
NOTE: The above steps are not required but can help the projection
alarm receive the signal faster.
3. Install the batteries in the projection alarm clock.
4. DO NOT PRESS ANY BUTTONS FOR 15 MINUTES.
NOTE: It is important to not press any buttons after inserting batteries as
this will interrupt the WWVB search sequence.
In this time the display will show the indoor temperature. If the station does not
display the indoor temperature after the 15 minutes please retry the set-up as
stated above. After the indoor temperature displays for 15 minutes you may
place the projection alarm in your desired location.
To complete the set-up of your temperature station after the 15 minutes have
passed, please follow the steps beginning on page 6.