Filter
Top Products
9
Inserting batteries
Remove the cover of the battery compartment and insert four 1.5 V AA-cells, (alka-
line type LR6) according to the correct poles into the battery compartment. Close
the battery compartment again.
PC-connection
To connect the station to a PC, use the USB cable to connect the mini USB jack to
the USB port of WS 550 US. The plug at the other end of the cable is connected
to the USB port of a PC (also see chapter 9.)
Installing / Mounting
Depending on the requirement, the weather station can be mounted on a vertical
surface (such as a wall) using a hanging eye or installed on an horizontal surface
using a table-stand.
The table-stands are mounted using the Allen screws and Allen key according to
the following description:
Start-up
(base station)
1. Remove the cover of the foot support:
first lock it in at the top, then fold it fully down-
ward and then remove it.