Filter
Top Products
16
3. Operations
The wireless sensor data is not shown on the display immediately after installing
the wireless sensors and starting up the base device. As each sensor has an in-
ternal individual serial number, which is automaticly logged into the base station
during start up.
The advantage here is that data is individually recorded only for those sensors that
are logged in and not for other sensors, say of neighboring systems, and also not
after a restart.
Please note!
If no input field is touched on entering data in the menu row for approx. 5 seconds,
then the device automatically goes back to the main menu (after including/saving any
settings that have been done). Hence wait for the main menu to be displayed after
you have entered data. You can thus quit each menu after making the settings.
Only touch the respective input fields slightly - do not press them! Do not press or
hit using any object!
The values can be set faster if you touch a setting field for a longer time; the values
are then forwarded faster and you do not have to keep touching the setup fields.
3.1. Log in/delete external sensors
A total of 9 external sensors of the types TX 550 US (1x), ASH 550-US, ASH 550-I US
and S 550 IA-US can be logged in. (Note: The ASH 550-US, ASH 550-I US and
S 550 IA-US are not currently available for purchase.)
The memory slots 1..8 are reserved for ASH 550-US (I) and S 550 IA-US.
The memory slot 9 has been reserved for the combi-sensor TX 550 US.
For unique sensor assignment in case of multiple sensors of types ASH 550-US (I),
or S 500 IA-US we recommend that you first remove the batteries from all the
sensors.
Logging in
- Touch the "CFG" field in the menu row.
-
You will see:
NEXT CLEANING ENTER
- Touch the "NEXT" field, the display is:
NEXT SENSOR ENTER