Filter
Top Products
17
PROGRAM
PROGRAM
5
PROGRAM
7
1
3
2
4
a
b
c
d
Other Play Methods
Program play
You can program up to 64 tracks in any desired order
including the same tracks.
For Audio CD, go to step
3. Though the display differs a
little, operation is the same.
1 (MP3/WMA only) During playback or in stop
mode, press PROGRAM.
a “PROG” lights up
b Program sequence number
2 (MP3/WMA only) Select the desired group
number. (e.g. 02)
c Group number
3 Press PROGRAM.
4 Select the desired track. (e.g. 03)
d Track number
5 Press PROGRAM
6 For MP3/WMA, repeat steps 2-5 to select
other tracks.
For Audio-CD, repeat steps 4 and 5.
7 Press 6.
7 To confirm the programmed tracks
In stop mode, press PROGRAM repeatedly. The pro-
grammed track number will successively appear together
with the program sequence number. At this time, you
can change the program, if required.
If the programmed tracks are less than 64, track number
“
” appears for the youngest programmable se-
quence number, enabling further programming.
7 To delete the entire programmed sequence
Set RESUME to “OFF”, then in stop mode, press 7. Turn-
ing off the unit deletes the program.
6
(For Audio CD)
Repeat steps 4 and 5 to program all the de-
sired tracks.
(Para CD de audio)
Repita los pasos 4 y 5 para programar todas
las melodías deseadas.
(Voor audio-CD)
Herhaal stappen 4 en 5 om alle gewenste mu-
ziekstukken te programmeren.
(For MP3/WMA)
Repeat steps 2-5 to program all the desired
tracks.
(Para MP3/WMA)
Repita los pasos 2-5 para programar todas
las melodías deseadas.
(Voor MP3/WMA)
Herhaal stappen 2-5 om alle gewenste muziek-
stukken te programmeren.
XL-PM30(en,sp,du)p01-18.p65 2002.06.18, 13:4517