JVC XL-PM30SL Portable CD Player User Manual


 
11
Sequential Play
Basic Play
This CD player can play back both Audio CDs and MP3/
WMA files (tracks).
1, 2 Firmly connect the plug into the jack.
3 Slide OPEN 3 to open the lid, and insert
the disc.
a Label must face upward.
Press the area near the center hole of the disc
until it clicks into position.
b Close the lid.
4 Release the HOLD mode.
5 Turn down the volume.
6 Press 6.
Playback starts.
c For Audio CD
d For MP3/WMA
e Track number in play
f Elapsed playing time of each track
g For MP3
h For WMA
i Scrolls
j Group number in play
k Track number (in the group) in play
l Elapsed playing time of each track
Play stops automatically when all the tracks have
been played.
7 Adjust the volume level.
File name and ID3 tag display (MP3/WMA only):
During playback, the file name and ID3 tag scroll on the
display as follows:
File name ] ID3 tag (Title ] Artist ] Album) ]
ID3 tag (Title ] Artist ] Album) ] .....
The file name scrolls at first only. Then, the ID3 tag
repeatedly scrolls.
For the ID3 tag, the Title, Artist and Album scroll in that order.
For your reference:
This indication appears for about 30 seconds if 3/8 is
pressed when no disc is loaded in the unit or if the disc is
not properly seated. Then, the unit is automatically shut off.
Messages successively appear before playing the track.
Opened lid
Stays lit for 30 seconds when the lid is opened. Then,
the unit is automatically shut off.
Note:
Never insert foreign objects into the unit.
XL-PM30(en,sp,du)p01-18.p65 2002.06.18, 13:4511