Filter
Top Products
CW200
CW200
16
10. Detailed Controls
Selecting Tracks
While playing, press the FF button to move to the next track. If is pressed after 3 seconds of track time, the
playback will start from the beginning of current track. If the button is pressed before 3 seconds of track time, the playback
will sart from the beginning of previous track.
Pressing FF or REW while player is stopped lets you go through the tracks stored in memory.
If you select Nor, One, All or Ran in repeat mode, only the tracks in selected album will be played. If you select Nor
All
, All
All
,
or Ran
All
, tracks in all albums will be played.
Moving within Track
Press the FF button for more than 1 second to fast forward. If the FF button is pressed until the end of the track,
the position goes back to the start of the track and fast forwards from thereon.
To rewind, press the REW button for more than 1 second. If REW button is pressed until the start of the track, the position
moves to the end of the track and rewinds from thereon.
Use +VOL or VOL- buttons to control volume.
Pressing the button for a long time makes volume change continuously.
Control Volume
Repeat Section
This feature is for the repeated playback of a certain section of track. This feature is especially useful in learning a foreign
language. To set the starting point ‘A’, press the REC/A↔B button while playing.
‘A’ will appear on the lower part of the LCD window.
To set the ending point ‘B’, press the REC/A↔B button again.
‘A↔B’ appears on the lower part of the LCD window, and now the playback will be conducted between point ‘A’ and ‘B’
repetitively until you press the REC/A↔B button once more to unlock the repeating mode.
Intro Scan
Intro Scan lets you sample through to all the tracks stored in memory quickly by playing only the first 7 seconds of each track.
To start Intro Scan mode, select Rpt and then Intro Scan from menu. ‘Intro’ is indicated in the LCD window and the first 7
seconds of all tracks are played.
While listening to the intro of a track, and if there is a track you want to listen fully, press the PLAY button to release
Intro Scan Mode.
I. iAUDIO