Filter
Top Products
3
Projection Clock Radio
www.insigniaproducts.com
LCD
Setting up your clock radio
Installing the backup battery
You can install a backup battery (included) to
provide temporary power in case the AC power
fails. The backup battery only maintains the correct
time.
To install the backup battery:
1 Make sure that the AC adapter is unplugged
from the power outlet.
2 Turn your clock radio around so the back is
facing forward, then unscrew the circular
backup battery cover.
3 Insert one CR2032 button cell battery (included)
into the battery compartment. Make sure that
the + symbol on the battery is facing out.
4 Reinstall the backup battery slot cover.
5 Plug the AC adapter into your clock radio and a
power outlet.
Uninstalling the backup battery
To uninstall the backup battery:
1 Make sure that the AC adapter is unplugged
from the power outlet.
2 Turn your clock radio around so that the back is
facing forward, then unscrew the circular
backup battery cover.
3 Push the metal clip in direction shown with a
screw driver or ballpoint pen. The backup
battery should pop out.
4 If the backup battery does not pop out, press it
down until it clicks, and repeat the Step 3.
# Indicator Description
RADIO
Lights when the radio is on. The AM or FM icon to the
right indicates the selected radio band.
SLEEP
Lights when the sleep timer is set.
SNOOZE
Lights when snooze is on.
VOL
Shows the volume setting for the radio.
MEM
Indicates a preset station is selected.
Alarm 2
Indicates the status of alarm 2. The icon below the
alarm icon indicates your selection.
•—Wake to buzzer
•—Wake to radio
• No icon—Alarm 2 off
Preset station number
Indicates the preset number selected.
Main display
Shows the current time, radio frequency, sleep time
setting, or alarm ring time.
Alarm 1
Indicates the status of alarm 1. The icon below the
alarm icon indicates your selection.
•—Wake to buzzer
•—Wake to radio
• No icon—Alarm 1 off
1
2
3
4
5
6
7
8
9