Filter
Top Products
4
NS-PRCL01 Projection Clock Radio
www.insigniaproducts.com
5 Reinstall the backup battery slot cover.
6 Plug the AC adapter into your clock radio and a
power outlet.
Connecting the power
To connect the power:
1 Place your clock radio in a convenient place near
a power outlet within range of the AC adapter.
2 Plug the AC adapter into the power outlet.
3 Plug the AC adapter into the DCIN 6V jack on
the radio.
Using your clock radio
Setting the time
To set the time:
1 Press and hold TIME SET until the hour blinks
on the display.
2 Press TIME+ or TIME– to set the hour.
3 Press TIME SET. The minutes blink on the
display.
4 Press TIME+ or TIME– to set the minutes.
5 Press TIME SET to store the setting.
Setting the alarm
To set the alarm:
1 Press and hold ALARM 1 (or ALARM 2
depending on the alarm you are setting) until
the hour blinks on the display.
2 Press TIME+ or TIME– to set the hour.
3 Press ALARM 1 (or ALARM 2 depending on the
alarm you are setting). The minutes blink on the
display.
4 Press TIME+ or TIME– to set the minutes.
5 Press ALARM 1 (or ALARM 2) to store the
setting.
6 Press ALARM 1 (or ALARM 2) repeatedly to set
the alarm mode. Settings include:
• Wake to buzzer— appears to the below of
the alarm icon.
• Wake to radio— appears to the below of
the alarm icon.
• Alarm off—Alarm icon disappears.
Turning off the alarm
To turn off the alarm:
• Press any button other than SNOOZE/DIMMER to
turn off the alarm while the alarm is sounding.
The alarm will be set for the same time the
following day.
If you do not want to set the alarm for the next
day, press ALARM 1 or ALARM 2 repeatedly until
the alarm icon disappears from the display.
Using snooze
To use snooze:
• While the alarm is sounding, press
SNOOZE/DIMMER. The alarm turns back on
automatically nine minutes later.
• To cancel snooze (the alarm will not turn back on),
press any button other than SNOOZE/DIMMER.
The alarm will be set for the same time the
following day.
Playing the radio
To play the radio:
1 Press RADIO ON/OFF to turn on your clock
radio.
• To select the radio band you want to listen to,
press AM/FM.
• To tune the radio up or down and select the
station you want, press TUNING+ or
TUNING–.
• To auto search for stations, press and hold
TUNING+ or TUNING– for more than two
seconds.
• To adjust the volume, press VOLUME+ or
VOLUME–.
• To tune to the next preset station, press
PRESET+ or to tune to the previous preset
station, press PRESET–.
2 Press RADIO ON/OFF to turn off your clock
radio.
Setting and using station presets
To set and use station presets:
1 Press RADIO ON/OFF to turn on your clock
radio.
2 Press AM/FM to select the radio band you want
to listen to.
3 Press TUNING+ or TUNING– to tune the radio
up or down and select the station you want.
4 To save the station as a preset, press PRESET
MEMORY. “MEM” and “01” blink on the display.
5 Press PRESET+ or PRESET– to select the preset
number you want to assign to that station.
6 Press PRESET MEMORY again to confirm the
setting. The station is stored in memory.
7 Repeat Steps 3 through Step 6 to store as many
as 10 AM presets and 10 FM presets.
8 To select a preset station, briefly press PRESET+
or PRESET– repeatedly until you reach the
station you want. “MEM” appears on the display,
along with the preset number selected and the
station frequency.
Caution
• To avoid damage to your clock radio, use only the
adapter supplied.
• To protect your clock radio during thunderstorms,
unplug the AC power adapter from the power outlet.