Filter
Top Products
27
Insignia NS-DV2G/NS-DV4G/ NS-DVB2G/NS-DVB4G Video MP3 Pla yer
www.insignia-products.com
5 Select the device you want to manage, then press (Next) or (Play/Pause).
Changing settings
Changing brightness, rotation, LCD, and backlight settings
To change the brightness, rotation, and backlight settings:
1 Press
(Menu). The main menu opens.
2 Select Settings, then press
(Next) or (Play/Pause).
3 Select Display, then press
(Next) or (Play/Pause). The Display menu opens.
4 Change any of the following settings:
• Brightness—Changes the brightness of the backlit screen.
• Rotation—Rotates the screen and flips the button functions to make left-handed use of the player
easier. Default is Right Handed.
• Backlight—Changes the length of time that the backlight stays on after you press a button. The
backlight may noticeably decrease battery life if it is left on for long periods of time.
• LCD—Determines if the LCD completely turns off when the device goes into idle mode (playing, but
you haven’t press a key). If this selection is On, then the LCD is dimly lit.
Changing power off and sleep settings
To change the power off and sleep settings:
1 Press
(Menu). The main menu opens.
2 Select Settings, then press
(Next) or (Play/Pause).
3 Select Time, then press
(Next) or (Play/Pause). The Time menu opens.
4 Change any of the following settings:
•Auto Power Off—Adjusts the length of time without any button presses that the player waits before
automatically turning off. You can select Off or a time up to ten minutes.
• Sleep—Changes the length of time the player waits before automatically turning off, regardless of
button presse
s or other activity. You can select 30-minute time increments up to 120 minutes.
Erasing all files and restoring factory defaults
To erase all files and change all settings to factory defaults:
1 Press
(Menu). The main menu opens.
2 Select Settings, then press
(Next) or (Play/Pause).
3 Select System, then press
(Next) or (Play/Pause). The System menu opens.
4 Change any of the following settings:
• Erase Internal Memory—Erases music files from Internal storage.
• Erase External Memory—Erases music files from External storage.
• Initialize—Resets all player settings to the factory defaults.
Manually changing the USB mode
The video MP3 player can use two USB modes, Media Manager (MTP, the default) mode and File & Folder
(MSC) mode. The player automatically detects which mode is best suited for your computer. During normal
operation, you are not required to change modes manually. If you want to override the automatic setting and
make the player start in File and Folder (MSC) mode, complete the following procedure.
To manually change the USB mode:
1 Turn off the player.
2 Move the Hold switch to the Hold pos
ition.
3 Connect the USB cable to the player. The player powers-up in File and Folder (MSC) mode.