Filter
Top Products
12
Insignia NS-CLW01 Weatherband Clock Radio
www.insigniaproducts.com
2 Place the mounting bracket in the desired location and mark the
location for the three mounting screws with a pencil.
3 Start pilot holes for the screws where you marked their location.
4 Screw the mounting bracket onto the mounting location with the
three screws provided. Make sure that the screws are flush with
the bracket.
5 Snap the transmitter into the mounting bracket.
Using your weatherband clock radio
Using the clock and alarm
To set the clock:
1 Press and hold TIME SET/TEMP until the hour blinks on the
display.
2 Press TUNE+ or TUNE– to set the hour.
Tip
• We recommend that you mount the transmitter on the North side
of your house, away from sources of heat or cold (such as
windows or vents) and out of direct sunlight or rain.
• The range of the transmitter is 80 ft. (24.4 m) in open space. The
signal will penetrate walls, but the range will be decreased.
Concrete and metal structures will further decrease the range.
• The transmitter should not be mounted on a metal surface or close
to sources of possible interference, such as cordless appliances
and microwave ovens.
• The temperature transmitter should be mounted vertically to
transmit the signal well.
• The FM antenna should be opened and the direction adjusted to
receive the best signal.
NS-CLW01 09-0289 ENG.fm Page 12 Friday, April 10, 2009 8:34 AM