Filter
Top Products
14
I
ns
i
gn
i
a
NS
-
CL01
Cl
oc
k
R
a
di
o w
i
t
h
iP
o
d
®
D
oc
k
www.insignia-products.com
2 Press ALARM 1 or ALARM 2 repeatedly to select iPod
®
, radio, or
buzzer.
To turn the alarm off:
1 Press any key (except SNOOZE/SLEEP) to turn off the alarm.
The alarm will be set for the next day.
2 If you do not want to set the alarm for the next day, press
ALARM 1 or ALARM 2 until “ALARM 1” or “ALARM 2” disappears
from the display.
To use the snooze:
3 While the alarm is sounding, press SNOOZE/SLEEP. The
SNOOZE indicator appears on the display and “10” appears in the
display for five seconds, then it reverts back to the real time. The
alarm turns back on automatically 10 minutes later.
4 If you press SNOOZE/SLEEP within those five seconds, each
time you press the SNOOZE/SLEEP button, the snooze time
increases by five minutes up to 60 minutes.
After you set snooze, the real time will display. Press SNOOZE/
SLEEP again to view the remaining snooze time for five seconds.
5 To cancel snooze (alarm will not turn back on), press ALARM 1 or
ALARM 2 (depending on the alarm that was set). The SNOOZE
indicator disappears from the display.
6 Repeatedly press ALARM 1 or ALARM 2 to select between alarm
off (alarm will not be set for the next day), alarm on for buzzer,
radio, or iPod
®
(alarm will be set for the next day).
Notes
• When the alarm time is reached, the alarm volume starts
at the minimum settings, then gradually increases in
volume until it reaches the current volume setting.
• If set to AM, FM, or buzzer, the alarm automatically turns
on for 20 minutes and then shuts off.
• If set to iPod
®
, the radio starts playback on the current
track. The radio will play back for 20 minutes, then turn off
automatically or, if the remaining song has less than 20
minutes of playback time remaining, the radio plays back
the remaining time of the song and then stops.
• If the alarm is set to iPod
®
and the iPod
®
is removed, the
alarm will sound the buzzer instead.
• If no key is pressed within 10 seconds, the radio will be
returned to the previous operation mode automatically.