Filter
Top Products
13
I
ns
i
gn
i
a
NS
-
CL01
Cl
oc
k
R
a
di
o w
i
t
h
iP
o
d
®
D
oc
k
www.insignia-products.com
To listen to another audio device:
1 Make sure the clock radio is turned off
2 Plug one end of the auxiliary line-in cable (not included) into the
Line-in jack on the back of the radio.
3 Plug the other end of the cord into the Line-out jack on the audio
device.
4 Turn on the radio.
5 Press FUNCTION one or more times until “Line-in” appears on the
display.
6 Use the controls on the audio device to control playback.
Setting the clock and the alarm
To set the clock:
1 Press and hold TIME SET. The time blinks on the display.
2 Press MIN (minute) to set the minute and HR (hour) to set the
hour. Make sure that you set the correct AM/PM setting.
3 Press TIME SET again. The clock is set.
To set the alarm:
1 Press and hold ALARM 1 or ALARM 2 (depending on the alarm
mode you want) until the display blinks.
2 Press MIN (minute) to set the alarm minute and HR (hour) to set
the alarm hour. Make sure to set AM/PM correctly.
3 Briefly press ALARM 1 or ALARM 2 again to save the setting.
The display stops blinking.
4 To cancel the alarm, press ALARM 1 or ALARM 2 until the alarm
indicator disappears from the display.
To set the alarm to buzzer, radio, or iPod
®
:
1 Briefly press ALARM 1 or ALARM 2 (depending on the alarm
mode you want). The time is displayed.
Note
Press the TIME SET button to display the clock and current
operation mode.
If no key is pressed within 10 seconds, the radio returns to
the previous operation mode automatically.