Filter
Top Products
OPERATIONAL INSTRUCTIONS
Setting the Time and Date - continued
Automatic Updating: Automatic update works with data sent over FM or by the network. The
clock is only updated when in a corresponding mode, so it is best to select a mode you use
regularly. FM uses time signals broadcast with radio transmissions. Network uses a time signal sent
from the Internet radio portal when in Internet radio mode.
1. Press the MENU button > System Settings > Time/Date > Auto update > then select Update
from, Update from FM or Update from Network.
2. To set the time zone press the MENU button > System Settings > Time/Date > Set timezone >.
3. If your country uses daylight savings, the automatically updated time may be wrong by one
hour. When daylight savings is in eect (during the summer), turn on the Daylight savings
option through Daylight savings > ON
* The iNT170 will auto-update from the selected source when time information is available.
04/07/2009
07:00AM 08:30AM
04:32PM
Alarms
Enable: On
Time: 06:30 AM
Mode: FM
Preset: 2
Frequency: Daily
As well as a clock/calendar, there are two versatile wake-up alarms
with Snooze function, and a sleep function to turn the system o
after a set period.
Setting the Alarm: To set or change an alarm, either press AL1 /
AL2 buttons or press the MENU button > Main menu > Alarms.
Select the alarm number (1 or 2) then set the following:
· Enable: on/o
· Time
· Mode: Buzzer, Internet radio or FM
· Preset: Last listened, 1-20
· Frequency: Daily, Once, Weekends or Weekdays
· Volume: 0 – 20.
Alarm and Sleep Functions
OPERATIONAL INSTRUCTIONS
Once the alarm is set, select Save to activate. The screen shows active alarms with an icon at the
bottom left.
· At the set time, the alarm will sound. To temporarily silence it, press the SNOOZE/DIMMER
button. You can change the snooze period (5min, 10min, 15min and 30min) by pressing the
SNOOZE/DIMMER button. The radio returns to standby for the set period, with the silenced
alarm icon ashing.
Sleep Function: To set the sleep timer, press the MENU button > Main menu > Sleep then choose
from Sleep OFF, 15 Min., 30 Min., 45 Min. or 60 Min. by pressing the SELECT UP and DOWN
buttons. Once you select a sleep period, the system returns to the main menu. Press the MENU
button to return to the “Now playing” screen. The other option is to press the SLEEP button to
achieve sleep function and sleep time.
Alarm and Sleep Functions - continued
Key:
0123456789., ab
cdefghijklmnopq
rstuvwxyzABCDEF
GHIJKLMNOPQRSTU
p@s5W
BKSP
OK
CANCEL
For Internet radio mode, you need a network connection. To connect the iNT170 to your network,
you need either a wired router and an ethernet (RJ45 network) cable, or a Wi-Fi wireless router,
together with password key if set.
The only requirement for using this Internet radio is a basic broadband Internet connection.
When you select Internet radio, the iNT170 attempts to connect to a network. If this is the rst
time it has tried to connect, or if the stored networks are not accessible, the Network wizard starts
automatically.
Connecting to a Network
· To run the Network wizard manually, press the MENU button >
System settings > Network > Internet wizard.
· Once the wizard starts, enter the following information:
- If not already established, set the WLAN region (select country/
region from list)
- Network name (select your network from the list)
- If connecting to an encrypted wireless network,
the key (password)
· To enter your key, use the SELECT UP and DOWN buttons to
move the cursor through the characters and select. As each
character is selected, the key is built up near the top of
the display.
iLuv | 11iNT170 | V10M10_IM_EN_1013200810 | iLuv