Filter
Top Products
OPERATIONAL INSTRUCTIONS
Conguring “My Account” - continued
· You can add stations not listed on the website by clicking the icon as follows.
Checking “My Favourites”
· In Internet Radio Mode, press the MENU button and highlight
Station list > and press SELECT button. Highlight My Favourites
> and press the SELECT button. You will see your folders in My
Favorite’s as shown below.
My Favourites
Chris’s folder
Jazz
OPERATIONAL INSTRUCTIONS
Checking “My Added Stations”
· In Internet Radio mode, press the MENU button and highlight Station list > and press the
SELECT button. Highlight My Added Stations > and press the SELECT button.
FM Radio Mode
In FM radio mode, the screen displays the station name, frequency,
and information about the station.
· To enter FM mode, either press the MODE button until the display
shows FM Radio or press the MENU button > Main menu > FM.
Another option is to press the FM button on remote control.
Selecting Stations: To nd a station, press the SELECT button.
The frequency display starts to run as auto scans the FM band. Alternatively, you can scan up or
down by holding the UP or DOWN button or tune manually with quick presses.
· Once a station is tuned in, the Now playing screen shows the station name and other information.
If no information is available, only the frequency is displayed.
· Presets:
- To store an FM preset, press and hold the PRESET button until the display shows the Save
preset screen. Select one of the 20 presets to save the currently playing station.
- To select a preset, press the PRESET button briey, then select one of the listed preset stations.
When a preset station is playing, it shows Pn (P1, P2 etc) in the bottom right of the screen.
“Now Playing” Information: Stereo broadcasts are indicated with an icon at the top of the screen.
To view further information about the broadcast, press the INFO button.
· Each time you press the INFO button, another set of information is displayed.
Settings:
· Scan Settings: By default, FM scan stops at any available station. This may result in a poor
signal-to-noise ratio (hiss) from weak stations. To change the scan settings to stop only at stations
with good signal strength, press the MENU button > Scan setting > Strong stations only? > Yes.
· Audio Settings: By default, all stereo stations are reproduced in stereo. For weak stations, this
may result in a poor signal-to-noise ratio (hiss). To play weak stations in mono, press the MENU
button > Audio setting > FM weak reception: Listen in mono only? > Yes.
Alice 97.3
FM
Best Music in the World
11:49
iLuv | 21iNT170 | V10M10_IM_EN_1013200820 | iLuv