Filter
Top Products
GETTING STARTED
Screen Displays - continued
Dialogue screens: Dialogue screens are shown to allow the user to change settings. They vary in
complexity from simple Yes/No options up to the scrollable network password input screen.
· As with menus, the selected item is shown with a
white background.
· Dialogue screens mark the current setting with an asterisk (*).
· The Standby screen shows the time, date and any active
alarm times.
· As you cycle through the play modes using the MODE button,
the LCD screen will show a splash screen for each mode. After
one second, the unit enters the selected mode plays the last
station that was playing in that mode. If this is not possible,
the iNT170 will attempt to connect to the selected source by
scanning for stations, networks, or prompting for user input
as appropriate.
Daylight savings
Daylight savings
OK
OFF
*
04/07/2009
07:00AM 08:30AM
04:32PM
Internet
Radio
OPERATIONAL INSTRUCTIONS
1. Place iNT170 on a suitable shelf or table and plug it in to a power outlet.
2. Once plugged in, the unit will automatically turn on. You should see a welcome message ‘iLuv
Starting’ and a moving progress bar.
3. The rst time the unit is switched on, it shows the main menu. Press the SELECT button until FM
is highlighted on the menu.
4. Press the SELECT button again to conrm.
5. The FM Now playing screen displays, showing the lowest frequency (87.5 MHz). Press the
SELECT button. The frequency display will increase incrementally as the radio scans up. Once a
station is found, it will play, with the station name shown in the Now playing display.
General Setup
Manual Updating: Select “Set Time/Date”, the date and time are
displayed as MM-DD-YYYY and hh:mm AM/PM with the rst value,
MM active (ashing).
· Adjust each value (month, day, year, hour, minute) with the
, and SELECT buttons. As each value is adjusted, the next value
becomes active and ashes.
· When you select the nal value (minutes or AM/PM, depending on
whether the clock is set to 12 or 24 hour mode), the display
reverts to the now playing screen and shows the newly
updated time.
01
•
01
•
2009
00:00
Set Time/Date
The default language is English. To change this, press the MENU button > System settings >
Languages > then select your language.
· A list of supported languages will appear on the LCD screen. Scroll up or down to choose from
the list.
Setting the Language
The time and date can be updated manually or automatically. Setting manually is simpler, but the
time and date will be lost when power is o. Setting automatically is a little more complicated at
rst, but the time and date will be automatically synchronized with external clocks, so it should
only need to be done once. As a result, automatic update is generally more accurate.
To enter the Time settings menu, press the MENU button > System settings > Time/date >
Setting the Time and Date
iLuv | 9iNT170 | V10M10_IM_EN_101320088 | iLuv